Fire Rated Doors   Commercial Doors
Impact Resistant Doors
Brentwood Doors   Brentwood Manufacturing Company
Doors
Brentwood Door Company
Doors
2045 Mt. Vernon Ave.
Doors
Pomona, CA 91768
Doors
(909) 629-9056
Lumber Core Doors
Residential Doors HOME | ABOUT US | WARRANTIES | FACE VENEER SPECS | FORMS | CONTACT US Brentwood Doors
Door Makers
 
Particleboard Core Doors
RPC 001Brentwood Mfg Co
APC 001Brentwood Mfg Co
APC 20PP-A-PairsBrentwood Mfg Co
Brentwood Mfg Co
Stave Lumber Core Doors
ALC 001Brentwood Mfg Co
ALC 002Brentwood Mfg Co
ALC 20PP-GP-ABrentwood Mfg Co
Brentwood Mfg Co
Fire Rated Doors
AMC 60 PP-BBrentwood Mfg Co
AMC 90 PP-BBrentwood Mfg Co
AMC 45/60/90 PP-B-PairsBrentwood Mfg Co
Brentwood Mfg Co
Impact Resistant Doors
ASC 002Brentwood Mfg Co
Brentwood Mfg Co
Commercial Doors
APC 001Brentwood Mfg Co
APC 20PP-A-PairsBrentwood Mfg Co
ALC 001Brentwood Mfg Co
ALC 002Brentwood Mfg Co
ALC 20PP-GP-ABrentwood Mfg Co
ASC 002Brentwood Mfg Co
AMC 60 PP-BBrentwood Mfg Co
AMC 90 PP-BBrentwood Mfg Co
AMC 45/60/90 PP-B-PairsBrentwood Mfg Co
Brentwood Mfg Co
Residential Doors
RPC 001Brentwood Mfg Co
 
Custom Doors Quote
Fire Rated Doors
 
AMC 90 PP-B
 
ARCHITECTURAL MINERAL CORE
90 MINUTE FIRE LABEL
POSITIVE PRESSURE CATEGORY B
AMC 90PP-B
pdf download
Printd this page
   
Impact Resistant Door
 
TOP RAIL Standard 1½” Firestop I top rail after final trim
VERTICAL STILES Standard ¼”maximum maple wood at centerline of bevel after trim; 27 pcf minimum density, backed with 1” Firestop II hinge and latch stile, single door
CORE Georgia-Pacific white mineral core
FACE All commercially available species veneers with Premium ‘A’ grade face, medium-density overlay, or tempered hardboard
BOTTOM RAIL Standard 1” Firestop I required after final trim; door undercut more than ¾” requires special blocking

WIC CERTIFIED & WDMA PREMIUM GRADE DOOR

DOOR STANDARDS:

Warnock HersheyNeutral pressure: 20-minute ITS/ Warnock-Hershey or U.L. fire labels shall be available within size and usage limitations. Fire-rated doors must use approved light frames. Louvers are prohibited in 20-minute fire doors. Neutral pressure
must be noted at time of bid.

Positive Pressure: fire label is available on 20-minute single doors going into welded or knockdown steel frames. Surfaced-applied smoke gasketing, such as Pemko S88, must be applied to achieve “S” rating (gasketing to be supplied by others). Listed and labeled steel light frames must be used for light openings. Positive pressure must be noted at time of bid.

Hardware preparation: All cutouts for mortise hardware shall be made at the factory from hardware manufacturer’s templates and approved shop drawings.

Size & Thickness: Doors shall be 1¾” ± 1/16” thick, and of sizes and designs as indicated on the drawings and schedules. Dimensions indicated are prior to factory trimming and prefitting.

DOOR FEATURES:

Maximum Size: 4/0 X 9/0 singles; 8/0 X 9/0 pairs
Available Thickness: 1¾”
Stiles Standard ¼”maximum maple wood at centerline of bevel after trim. 27 pcf minimum density; backed with 1” Firestop II hinge and latch stile singles.
Cutouts Allow 5” minimum distance from door edges and hardware cutouts, not to exceed 40 percent of door surface
Standard Bevel ⅛” in 2”
Glue Type I
Veneer Match Book match standard. Slip or random available if specified (pair & set match). Others available upon request.
Fire Labeling Options 45/60 Minute ‘S’ Label, Positive Pressure CATB label requires Pemko S88 gasket seal.
Warranty Information Lifetime interior warranty. See warranty for further details.

Over 50 Years of Unsurpassed Quality and Service

Wood Companies

Custom Doors
Door Manufacturers
Brentwood Doors Door Manufacturer Doors
Glass Doors
  Home | About Us | WARRANTY | forms | Contact Us  
Previous
Next
Close Move